ºìÌÒÊÓƵ

AC-DC LED Drivers | FL7733A

LED Driver with Power Factor Correction, Primary-Side-Regulated

Active

Datasheet

ºìÌÒÊÓƵ

Overview

The FL7733A is a highly-integrated PWM controller with advanced Primary-Side Regulation (PSR) technique to minimize components in low-to-mid-power LED lighting converters.
Using an innovative TRUECURRENT® technology to provide tight tolerance constant-current output, this LED driver enables designs with constant current (CC) tolerance of less than ±1% over the universal line voltage range to meet stringent LED brightness requirements.
By minimizing turn-on time fluctuation, high power factor and low THD over the universal line range are obtained in the FL7733A. An integrated high-voltage startup circuit implements fast startup and high system efficiency. During startup, adaptive feedback loop control anticipates the steady-state condition and sets initial feedback condition close to the steady state to ensure no overshoot or undershoot of LED current.The FL7733A also provides powerful protections, such as LED short / open, output diode short, sensing resistor short / open, and over-temperature for high system reliability.
The FL7733A controller is available in an 8-pin Small-Outline Package (SOP).

  • Lighting
  • LED Lighting – Mid Power – Non dimming
  • LED Lighting – Mid Power- Analog/PWM dimming
  • LED Lighting – Low Power – Non dimming
  • LED Lighting – Low Power – Analog/PWM dimming
  • LED Lighting – High Power – Non dimming
  • LED Lighting – High Power- Analog/PWM dimming

  • LED Lighting

  • Performance
  • < ±3% Total Constant Current Tolerance Over All Conditions
  • < ±1% Over Universal Line Voltage Variation
  • < ±1% from 50% to 100% Load Voltage Variation
  • < ±1% with ±20% Magnetizing Inductance Variation
  • Primary-Side Regulation (PSR) Control for Cost-Effective Solution without Requiring Input Bulk Capacitor and Secondary Feedback Circuitry
  • Application Input Voltage Range: 80 VAC - 308 VAC
  • High PF of > 0.9, and Low THD of < 10% Over Universal Line Input Range
  • Fast < 200 ms Start-up (at 85 VAC) using Internal High-Voltage Start-up with VDD Regulation
  • Adaptive Feedback Loop Control for Startup without Overshoot
  • LED Short / Open Protection
  • Output Diode Short Protection
  • Sensing Resistor Short / Open Protection
  • VDD Over-Voltage Protection (OVP)
  • VDD Under-Voltage Lockout (UVLO)
  • All Protections are Auto Restart (AR)
  • Over-Temperature Protection (OTP)
  • Cycle-by-Cycle Current Limit

Product Resources

Product services, tools and other useful resources related to FL7733A

CAD Model

CAD Model

Material Composition

Product Change Notification

Reliability Data

Product List

If you wish to buy products or product samples, please log in to your ºìÌÒÊÓƵ account.

Search

Close Search

ºìÌÒÊÓƵ:

1

Share

Sort by

Product Groups:

┗

Orderable Parts:

1

Product

Status

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (°C)

Container Type

Container Qty.

ON Target

Topology

VI Min (V)

VI Max (V)

VO Max (V)

IO Max (mA)

fSW Typ (kHz)

Reference Price

FL7733AMX

Loading...

Active

CAD Model

Pb

A

H

P

SOIC-8

751EB

1

260

REEL

2500

Y

PSR PFC Flyback

17.5

308 VAC

18 VGATE

60/180 mA - Source/Sink

70

$0.3877

More Details

Show More

1-25 of 25

ºìÌÒÊÓƵ per page

Jump to :

1

Product Support

If you're interested to learn about this ºìÌÒÊÓƵ product, contact sales by filling out the form below.

Reliability Data

Die Related Summary Data

Device: FL7733AMX

Equivalent to wafer fab process: CN

Product Technology

Product Technology

Equivalent Device-Hours

MTBF/MTTF in Hours

FITS

CN

6

425600109

More Details

Re-calculate Data

Data is based on the following assumptions.

Note: The temperature and confidence level may be adjusted to your requirements.

Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)

New Search
Email Sales
Please provide a first name.
Please provide a last name.
Please provide a company/university name.
Please provide a valid email.
Please choose a country.
Please choose a job title.
Please provide a how could we help you.
You have to agree with the privacy policy.

This site is protected by reCAPTCHA and the Google and apply.

Hello, your current browser settings are preventing us from processing your submission. You can adjust your browser settings and reload the page or you can submit an email directly to inside.sales@ºìÌÒÊÓƵ.com

You might also try the following:

  • Clear your browser cookies
  • Try to open this page in anonymous browser window
  • Try a different browser
  • Make sure you have reliable internet connection

Thank you for submitting the contact sales form. Your request is on its way to our sales support team!

We thank you for your interest in ºìÌÒÊÓƵ and are working on your request. Our sales support team will respond to your request within two business days.